Cleaning And Care; Cleaning And Maintenance; Specification; Deposal - Thermrup HI616-AKK Gebrauchsanweisung

• Carefully place the insole inside the boot or shoes. Next, connect the
plug of the cable to the socket of the battery. Fasten the gaiter along
the leg and place the battery in the battery pack holder. You can tie
the cable with the Velcro.
• Press the power key for approx. 2 seconds to switch on the battery.
Next, briefly press the power key again (several times if necessary)
to set the desired temperature level (1 to 4). Once the lowest level is
reached (25%) and the power button is pressed again, the heating
function is switched off and the LED indicators no longer light up.
• After using the heated soles, please disconnect the battery from the
cable and press the power button for about 2 seconds, thus the LED
display shows the remaining capacity of the battery. • Always turn
off the heating function when not in use.
!! Discontinue use when the sole gets uncomfortably hot.

5. Cleaning and Care

• The The electrically operated heated insoles and the velvet
accumulator gaiters can be washed in water by hand or in a washing
machine at up to 45°C in a wash bag, if necessary.
• Before cleaning, always disconnect the batteries from the insole.
• Never use aggressive cleaning agents or strong brushes.
• Do not dry or iron the heating insole in a dryer.

6. Specification

• Model
• Power supply : 7.4V; Max. 7 W
• Power supply : input : 100-240V ~ 50 / 60Hz
• Battery
: HI616AKK
output : 8.4V; 2A
: Li-Ion 7.4V 2500mAh
11