Operating; Charging The Battery - Thermrup HI616-AKK Gebrauchsanweisung

4. Operating

4.1 Charging the battery

• It is recommended to fully charge the battery for at least 3 hours
before first use or after a long period of non-use.
• Connect the charger cable to the battery and then to a power outlet
to charge the batteries. During the charging process, the LED
indicator flashes at the corresponding battery level. When charging
is complete and the battery is fully charged, the 4 LED indicators will
illuminate. Finally, you can disconnect the charger from the mains
and the battery.
• To check the battery capacity, press the power button shortly.
• If the soleplate is not used for a longer period of time, it is
recommended to charge the battery sufficiently every 6 months to
ensure the continued functionality of the battery.
4.2 Operating the heated insole
• To fit your individual shoe size to the insole, please cut carefully
along the cutting lines of the electric heated insole. The cut line on
the insole indicates exactly the appropriate size.
• The tip of the heated insole can be cut
without negatively affecting the heating
function of the insole.
LED- indicators
(Ladekapazität/Te
Power Button
mp.Stufen)
(Ladekapazität/Te
mp.Stufen)
10