Cleaning And Maintenance - Thermrup HB619U Gebrauchsanweisung

• When the blue level is reached and the ON/OFF button is pressed again, the
heating function is switched off and the LED indicators no longer light up. After
90 minutes of continuous operation, the heating belt will automatically turn off,
restart your powerbank to continue.
!! Discontinue use if you see reddening of the skin or if the belt becomes
uncomfortably hot! Excessive heat can cause burns.
4.2 mains operation
• Connect the supplied extension cable to the
connection cable of the belt.
• Plug the USB connector of the extension cable into
the supplied power supply.
• Press the power button of the controller short to switch on the controller.
Then press the power button briefly to set the desired temperature level
(1-2-3, red -green-blue).
• Press the power button until all of the LED off to switch off the controller.
• After use, remove the extension cord from the
charger.
*** Please use only the supplied charger. ***

5. Cleaning and maintenance

• Before each cleaning, remove the heating pad &
the cable from the belt.
• Never use aggressive detergents or strong brushes.
• The heat belt can be washed in the washing machine up to 45°C in a wash
bag or in the supplied wash bag.
• The heat belt must not be dried in a dryer or ironed.
It should not be used again until the device is completely dry.
8