Cleaning And Maintenance; Disposal - Thermrup MHP621 Gebrauchsanweisung

• The four T-LED shows the remaining capacity of the battery. (If the battery is full, all
four T-LEDs light up)
• After 30 seconds, the power button will go into power-saving mode and the LED
indicator will darken, but the heating function will continue. Briefly press the power
button again to unlock it from power-saving mode. You can then set your desired
level as described above.
• Press the on / off switch for approx. 2 seconds to switch off the heating function.
** Stop using it if you see redness on your skin. Excessive heat can cause burns!
4.4 Main Operation
• Connect the charger and the cable of the belt with the
adapter cable
• Press the controller's power button for approx. 2
seconds to switch the controller on.
• Then press the power button briefly (several times if
necessary) to set the desired temperature level (1-2-3,
red-green-blue).
• Press the power button for approx. 2 seconds to switch off the controller.
• After use, remove the belt from the charger.
*** Please only use the supplied charger***

5. Cleaning and maintenance

· Before cleaning, disconnect the heat belts from the Battery or power supply.
· Never use aggressive cleaning agents or strong brushes.
· The heat belt can be washed in the washing machine up to 45 ° C in a washing
bag or supplied washing bag.
· The thermal belt must not be dried or ironed in a dryer.

6. Disposal

This product must not be disposed together with the domestic waste. All users
are obliged to hand in all electrical or electronic devices, regardless of whether or
not they contain toxic substances, at a municipal or commercial collection point
so that they can be disposed of in an environmentally acceptable manner.
Consult your municipal authority or your dealer for information about disposal.
9