Cleaning And Maintenance; Disposal - Thermrup WTB620 Gebrauchsanweisung

4.4 Main Operation
• Connect the charger and the cable of the belt with the adapter cable
• Press the controller's power button for approx. 2 seconds to switch the controller
on.
• Then press the power button briefly (several times if necessary) to set the desired
temperature level (1-2-3, red-green-blue).
• Press the power button for approx. 2 seconds to switch
off the controller.
• After use, remove the belt from the charger.
*** Please only use the supplied charger***

5. Cleaning and maintenance

· Before cleaning, disconnect the heat belts from the Battery or power supply.
· Never use aggressive cleaning agents or strong brushes.
· The heat belt can be washed in the washing machine up to 45 ° C in a
washing bag or supplied washing bag.
· The thermal belt must not be dried or ironed in a dryer.

6. Disposal

This product must not be disposed together with the domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless of
whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally
acceptable manner. Consult your municipal authority or your dealer for
information about disposal.
10