BOMANN DU 660 IX Bedienungsanleitung Seite 23

CAUTION: : : : CAUTION
CAUTION CAUTION
• Do not use a wire brush or other sharp, abrasive items. Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive Do not use any acidic or abrasive cleaners.
• To clean the surface of the housing, use a mild
• The appliance can be used again after The appliance can be used again after everything has dried properly.
• If you use your extractor hood in recirculation mode, you must
(see "Replacing the activated carbon
Cleaning the aluminum grease filter Cleaning the alumin Cleaning the alumin Cleaning the alumin um grease filter um grease filter um grease filter
WARNING: Risk of fire! WARNING: Risk of fire!
WARNING: Risk of fire! WARNING: Risk of fire!
Grease residues in the alumin residues in the aluminum grease filter may ignite on exposure to high te
peratures. It is therefore important that the grease filter is regularly cleaned / re- peratures. It is therefore important that the grease filter is regularly cleaned / r peratures. It is therefore important that the grease filter is regularly cleaned / r
placed.
Grease and vapours collect in the filter
clean the grease filter monthly:
• Remove the aluminum grease filter
tly and pull out towards the front.
• Rinse the grease filter in a solution
• Then clean with a soft brush, rinse
• Alternatively, the grease filter can
occur in the dishwasher. This does
Replacing the activated carbon filter Replacing the activated carbon filter Replacing the activated carbon filter Replacing the activated carbon filter
The activated carbon filter absorbs odours
Order the carbon filter from your dealer
reference number found under "Technical
• See "Installing the activated carbon
• Remove the old carbon filter by turning the filter anti
Replacing the lighting Replacing the lighting Replacing the lighting Replacing the lighting
WARNING: WARNING:
WARNING: WARNING:
Allow the lamps to cool before replacing
• Use the correct lighting: 2 x 28 W Halogen lamps (Type E14
• Pull the pull-out device and remove the aluminum grease out device and remove the aluminum grease filter.
• Remove the faulty bulbs and screw in new bulbs. Remove the faulty bulbs and screw in new bulbs.
• Reinstall the aluminum grease filter. Reinstall the aluminum grease filter.
housing, use a mild detergent and a soft cloth to prevent scratching.
tractor hood in recirculation mode, you must replace the activated
bon filter").
um grease filter may ignite on exposure to high tem-
filter and may accumulate if not regularly cleaned. We
filter by sliding back the lock in the handle recess,
solution of hot water and neutral detergent. Soak the filter
rinse thoroughly with hot water and leave to dry.
can also be cleaned in the dishwasher (up to 60°C).
does not affect the function of the grease filter.
odours and must be replaced at least every six months,
dealer or in our online accessories shop,
"Technical Data".
carbon filter for recirculation mode".
turning the filter anti-clockwise.
placing the lighting. Risk of burns!
2 x 28 W Halogen lamps (Type E14 2 x 28 W Halogen lamps (Type E14) ) ) ) 2 x 28 W Halogen lamps (Type E14
2 x 28 W Halogen lamps (Type E14 2 x 28 W Halogen lamps (Type E14 2 x 28 W Halogen lamps (Type E14 2 x 28 W Halogen lamps (Type E14
Risk of burns! Risk of burns! Risk of burns!
23
vent scratching.
vated carbon filter regularly
cleaned. We recommend that you
cess, push the filter down gen-
filter in the solution.
60°C). Slight discoloration may
months, depending on use.
www.bomann.de. To order, use the www.bomann.de www.bomann.de www.bomann.de
www.bomann.de www.bomann.de www.bomann.de www.bomann.de