C- Wiring / Installing; C1- Wiring Diagram - SCS Sentinel AudioKit 32068 Installations- Und Bedienungsanleitung

C- WIRING / INSTALLING

C- WIRING / INSTALLING

C1- Wiring diagram

LOCK OR STRIKE : OPTIONAL
C2- Attaching and connecting the elements
• Attach the outdoor station at a height of 1.5 metres mounted on a flat wall back plate.
• Installation under a porch or a covered area is highly recommended.
• Remove the top from the panel, slightly lift then slide off the front panel.
• Connect the outdoor station wire and insert the outdoor station on its support.
• Attach the interior unit at a height of 1.5 metres on a flat wall. First fit the rear plastic support, connect the wires
and place the handset on its support.
• Connect the interior unit.
• Perform functional test before finalizing fixing of the elements.
After installing and testing, place a clear silicon seal on the top and sides of the outdoor station (not on the
bottom) to avoid any risk of infiltration.
6 EN
Notice_PAF0001_V0821_indH.indd 6 Notice_PAF0001_V0821_indH.indd 6
Outdoor station
4 3 2 1
From 0 to 10 metres :
From 0 to 50 metres: use 0.75 mm² cable
use 1mm² cable.
From 51 to 100 metres : use 1 mm² cable
Connecting cables
not provided
Handset
1
2
3
4
5
6
Back plate outdoor station
96
187
16/08/2021 16:18:33 16/08/2021 16:18:33