Charging Steps - be cool eSC-Pro3 Bedienungsanleitung

7. If finding the battery broken and smells bad or felt hot , you need to stop using and
keep the battery away from other stuffs.
8. It helps prolong the lifespan if storing battery after 100% fully charged
9. It is not allowed to store the battery under 0°C or higher 40°C condition.
10. You have to charge it to at least 80% capacity if battery not used more than 30
days. Better to charge it 100% full every 90 days to protect the battery function.
11. It will help prolong the battery lifespan significantly that you charge well
accordingly to the manuals after every driving instead of running it out. At room
temperature, the battery can play a higher range and performance. But battery life
and performance will degrade if used at temperatures below 0℃. Typically, the
range may be half or less than at room temperature at 10°C.
12. Do not charge and park e-scooters in residential buildings. Keep away from
combustibles when charging, and the charging time should not be too long.
13. Improper disposal of used batteries may seriously pollute the environment. Please
abide by local regulations when disposing of this battery.
When the internal temperature of the battery exceeds 50°C, the battery is in a
protected state and cannot be charged.

9.2 Charging steps

•
Open the charging port cover, make sure the charging port is clean and dry.
•
Connect the charger with the battery and the other end with power(100V-
240V;50/60Hz), make sure the charging indicator is on.
•
When the indicator light on the charger changes, indicating that the charging
process is normal, otherwise check if the line connection is good.
•
The indicator turns green when the charger is charging; it indicates that the
battery has been fully charged. Please stop charging; long time over charge will
affect the battery life.
Tip: When the battery is charged separately, the charging status can be viewed on the
charging indicator on the battery. It displays red color when charging and green color after
full charging.
10. MAINTENANCE
•
Make sure the electric scooter charger and charging line are disconnected and
ensure that the electric scooter is off.
•
Wipe the shell with a soft cloth to clean the electric scooter. Please don't put
more lubricating oil on bearing when you do the maintenance for it.
• Please check the brake system and tire are vulnerable parts at least once a
month. When the brake performance and tire grip are reduced, please contact the
dealer to replace the corresponding parts.
• Please do not replace the accessories which not provided by manufacturer
without permission, to avoid the safety hazard caused by the inconsistency for
accessories with the scooter.
• It is forbidden to clean electric scooters by using water cannon or soaking in liquid.
This will cause permanent damage of the electronic devices in the host.
• In order to protect the user's safety, the user can not take apart the electric
scooter, otherwise, the user will give up the maintenance warranty rights of the
product automatically.
Seite 43 von 47
English