Herunterladen Inhalt Inhalt Diese Seite drucken

Storage; Troubleshooting; Disposing Of The Device; Spare Parts List - Sabo HC-66 Betriebsanleitung

Akku-heckenschere
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
CLEANING YOUR DEVICE
WARNING
Remove the battery before all cleaning, maintenance, setting and repair work.
WARNING
Do not use solvents when cleaning the plastic parts. Most plastics are sensitive to solvents and can be damaged by their use. Use a clean cloth to remove dirt such as dust, oil,
lubricants etc. Use only original spare parts for maintenance. The use of other parts can cause danger or damage the product.
WARNING
Never bring plastic parts into contact with liquids such as petrol-based products, oil, aromatised oils, brake fluid, fuels and diluents. These can attack plastic materials or destroy them.
·
Remove the battery.
·
Clean your device with a damp cloth or a gentle cleaning agent such as soapy water.
·
Moisture can lead to electric shocks. Carefully dry the device with a dry cloth before use.
·
Use a small brush or a small vacuum cleaner with brush to remove dust from the small ventilation slots on the battery and on the motor housing.
·
Keep the ventilation slots clean.
11

STORAGE

See figure 1 and 8
·
Clean your tool thoroughly before storage.
·
Store the device in a well-ventilated, dry location out of the reach of children. Keep the device away from corrosive chemicals and salt.
·
Always install the blade cover (8). See figure 8
·
Store the battery at room temperature. Lower or higher temperatures may reduce the life. Store the battery dry and at a temperature below 27°C.
·
Never store discharged batteries.
·
The battery's charge declines during storage. The higher the temperature, the faster the discharge. Recharge the batteries monthly is stored for a longer period. This increases the life
and maintains performance.
12

TROUBLESHOOTING

PROBLEM
Motor does not start when the
release switch and the manual safety
switch are pressed.
The motor runs, but the cutters are
not moving.
The hedge trimmer smokes during
operation.
There are unusual noises and/or
strong vibrations during operation.
13

DISPOSING OF THE DEVICE

Do not dispose of electric devices with household waste. Dispose of these devices at recycling centres. Contact the relevant authorities or your retailer for information about this.
Separate collection of used products and packaging allows materials to be recycled. The reuse of materials helps to prevent pollution and reduces the need for raw materials.
Dispose of batteries at the end of their use and consider the environment. The battery contains material that is dangerous to you and the environment. Therefore, it must be
disposed of separately in a facility that accepts lithium-ion batteries.
14

SPARE PARTS LIST

·
See spare parts catalogue
POSSIBLE CAUSES
Battery is not engaged.
The battery is not charged.
The hedge trimmer is defective.
Dirt or something else is blocking the
cutter.
The hedge trimmer is defective.
Parts are loose.
Parts are damaged.
SOLUTION
To lock in the battery, make sure that the tabs on the top of the battery engage.
To charge the battery, please follow the operating instructions for your battery and charger model.
Stop using the hedge trimmer and call technical service.
·
Stop the machine.
·
Remove the battery.
·
Remove the obstructing objects from the cutters.
Stop using the hedge trimmer and call technical service.
·
Stop the machine.
·
Remove the battery.
·
Check the machine for damage.
·
Check the machine for loose parts and tighten them if necessary.
Stop using the hedge trimmer and call technical service.
25

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Verwandte Produkte für Sabo HC-66

Inhaltsverzeichnis