Temperature Warning; Compliance; Serial Number, Configuration, Date Code, And Modification Codes - Codonics Horizon Ci Bedienungsanleitung

Temperature Warning

Because the Horizon imager is a thermal print device, the surface of the thermal print head heat
sink gets hot. Avoid directly touching any components not colored green when accessing the
interior of the imager if the imager has been printing. (During some preventative maintenance
tasks, you will be touching internal components with cleaning pads or swabs.)
The temperature warning label is shown below.

Compliance

Codonics is in compliance with various regulations.
The Compliance label, which is affixed at the back of the imager, is shown below.

Serial Number, Configuration, Date Code, and Modification Codes

The Serial number label is placed onto the Compliance label. It includes the following information.
•
The serial number (SN), which uniquely identifies the unit.
•
The Configuration number (CNFG), which details the build configuration.
•
The modifications codes, which are to the right of the CNFG number and are a series of 20
numbers. When any of these numbers are blocked out, that identifies a modification that was
made to the unit.
•
The date code in YYYY-MM format below the factory date code symbol.