Technoline WT 7110 Bedienungsanleitung Seite 5

Let the hour hand point to 12 o'clock (hanging hole for nail is at 12 o'clock)and press it onto the
7.
movement
Fix the minute hand into the position as the hour hand and keep both parallel at 12 o'clock.
8.
9. Press the second screw onto the movement.
Note
An alternative hanging method to the included wall hook should be used for concrete or brick walls, which
are too hard for the wall hooks nails.
To start the clock
Insert 1 x Mignon AA LR06 battery into the battery compartment and make sure the battery polarity (+/-)
is as indicated.
To set the time
Turn the hand set knob in rear of movement clockwise or counter clockwise until the desired time is
obtained on the dial.