Transporting The Product; Setting Up The Product - CARAVITA BELVEDERE Montage- Und Bedienungsanleitung

4.3

Transporting the product

The product is easy to transport without additional aids.
Due to its weight and size, two people are required to transport the product.
NOTICE
Property damage due to cracks and bent ribs
Lack of care during transport may damage the canopy.
Do not drag the parasol over the ground by holding the canopy fabric or the protective cover.
I
Do not carry the parasol by holding individual ribs.
I
4.4

Setting up the product

NOTICE
To operate the lever mechanism, sufficient space must be available behind the parasol (approx. 65 cm).
Preparation
For safety reasons, the parasol should be set up by at least two people.
I
Prepare the mobile base or ground sleeve as instructed by the manufacturer.
I
The mobile base must be sufficiently heavy.
I
Have the stainless steel screws and the hex key contained in the scope of delivery available.
I
Remove the protective cover from the canopy.
I
Have a power drill ready.
I
Installing the aluminium cap on the canopy
The protective cover is removed and the canopy is lying on a clean surface.
4000258 [v0]/2022-01-01
To transport the parasol, grasp around it with both hands.
1 The fixing screws are inserted in the aluminium finial.
2 Place the aluminium finial on the tip of the canopy.
Installation
31 | 88