System; Initial Settings; Anynet+ (Hdmi-Cec); Bd Data Management - Samsung HT-D4200 Bedienungsanleitung

Setup

System

Initial Settings

By using the Initial Settings function, you can set
the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of this
user manual. (See page 24)

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked
operations with other Samsung products that
have the Anynet+ feature.
To operate this function, connect this product to
a Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY (►)
button on the TV's remote control.
For more information, please see the TV user
manual.
•
Off : Anynet+ functions will not work.
•
On : Anynet+ functions will work.
✎
NOTE

This function is not available if the HDMI cable
does not support CEC.

If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.

Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.

BD Data Management

Lets you manage the downloaded contents you
accessed through a Blu-ray Disc that supports
the BD-LIVE service and stored on an attached
Flash memory device.
You can check the device's information including
the storage size, delete the BD data, or change
the Flash memory device.
36
English
HT-D4200_ELS_1223.indd 36 HT-D4200_ELS_1223.indd 36
All manuals and user guides at all-guides.com
BD Data Management Screen Information :
•
•
•
•
•
✎

Time Zone

You can specify the time zone that is applicable
to your area.
DivX® Video On Demand
Shows the registration code authorized for the
product. If you connect to the DivX web site and
register using that code, you can download the
VOD registration fi le. If you activate the VOD
registration using My Contents, the registration is
completed.
✎
Current Device : Display the selected device.
Total Size: Total memory size of the device.
Available Size: Available memory in the device.
Delete BD Data: Delete all BD data in the
storage.
Select Device: Change location of desired
memory to store BD data.
NOTE

In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.

Only those USB devices formatted in FAT fi le
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.

The Resume Play function may not work after
you format the storage device.

The total memory available to BD Data
Management may differ, depending on the
conditions.
Settings
Time Zone
Display
Audio
Network
System
Language
Security
GMT + 00:00
General
London, Lisbon, Casablanca
Support
< Change " Save ' Return
NOTE

For more information about DivX(R) VOD, visit
"http://vod.divx.com".
2011-12-23 2011-12-23 2:07:12 2:07:12