Beko HTV 8716 DSW BTR Bedienungsanleitung Seite 40

Machine does not start or programme cannot be started.
• Power cable might be unplugged. >>>
the power cable is plugged in.
• Programme might not be set, or the Start/Pause/
Cancel button might not be pressed. >>>
programme is set and the machine is not in Stand-by mode.
• Child lock might be enabled. >>>
Laundry shrinks, fades, tarnishes or gets damaged.
• The programme selected might not be suitable for the type
of laundry. >>>
Check the care labels on garments and select a
programme accordingly, or select timed programmes additionally.
You should not dry laundry that is not suitable for drying.
Machine does not dry.
• Laundry might not be dried or the drying step might not
be enabled. >>>
Check if the drying function is selected
after the selected washing programme.
Loading door cannot be opened.
• The door of your machine might not be opening due to
safety reasons. >>>
on the display after the drying step, the machine will keep the
door locked for your safety until it cools down.
• The loading door will not open if there is no power.
>>>
To open the loading door, open the pump filter cap and
pull down the emergency handle positioned at the rear side of
the said cap. See "Loading door lock"
(*) Machine does not switch to spinning step
when the laundry is not evenly distributed in the
drum to prevent any damage to the machine
and to its surrounding environment. Readjust the
laundry and perform spinning again.
(**) The drum might not have been cleaned
regularly. Clean the drum regularly. See 6.2
>>>
A
CAUTION!
• If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
A
WARNING!
• Check the HomeWhiz section for the
relevant troubleshooting information.
40 / EN
Make sure that
Make sure the
Disable Child Lock.
If the door locked indicator is active
Washer-Dryer / User Manual