Advantages Of An Induction Cooking Plate - MIA IKP 2209 Multi Induction Duo D Bedienungsanleitung

Note: Do not use cookware made of glass, ceramic or aluminium. This kind of cookware is
not suited for use with induction cooking plate.

Advantages of an induction cooking plate

Energy transfer only while cookware is put on the cooking plate = maximum energy saving
(up to ca. 50 %)
Heat is generated in the bottom of the cookware and immediately directed into the food. The
power preset is absorbed immediately into the cookware. This guarantees extremely high cooking speed.
High effectiveness during parboiling and minimum power consumption during cooking reduces
total energy consumption up to 30 %.
Precise controlling (by 3 different adjustable functions) guarantees quickly and tightly focused heat input.
Basically the cooking area stays cold, only the redirection of heat of the cooking ware warms it up.
As the induction cooking plate is only heated up by the heated cookware, the risk of scorching or
burning in of food residues is reduced. The induction cooking plate does not stay hot as long as
standard cooking plates (easy cleaning).
When the cookware is removed the device switches automatically into the Standby Mode.
The device detects whether suitable cookware is placed on the cooking plate. If not, no energy
is transmitted.
When operating the induction cooking plate with empty cookware, a temperature sensor turns
off the heating function in case of overheating.
Operating of the device
Caution! Never leave the appliance unattended when it is in operation!
Please follow the sequence below when adjusting the appliance. You can adjust power (watts)
temperature (C °degrees) and cooking time (hours/minutes).
The appliance provides 2 induction cooking plates. You can use separately or both at the same time.
Power levels:
Temperature levels:
Time presetting:
Tip: The above fat marked levels for power level or temperature level 10 and 240 - are the pre-setting
of the power level of this unit and they will appear after turning on the unit.
Before plugging always place suitable cookware filled with food centred onto the induction cooking
plate. Otherwise error function will occur (see Chapter "Safety function").
Insert the plug into a suitable socket, a short acoustic signal resounds. The appliance switches into
Standby Mode.
Now press the ON/OFF switch to turn the device on. A short acoustic signal resounds (whenever
you press a button again or new button, a short acoustic signal resounds). The fan inside begins
to work. The control lamps above both ON/OFF switches begin to blink. Now press the ON/OFF
switch for right and/or left cooking field. The LED control lamp above will illuminate permanently.
Start the induction cooking plate desired, by pressing the button "STUFE" (power level). The display
now shows automatically 10 for highest power level. This is an automatic presetting.
The appliance is now in the power mode. Select the desired power level higher or lower by
pressing the arrow buttons (adjustable power level: from 1-10). You can make adjustments of power
mode manually by pressing the arrow buttons.
To select the desired temperature push the button "TEMP" (Temperature). Now the appliance is in
temperature mode. Select the desired temperature level higher or lower by pressing the arrow
buttons (adjustable from 60° to 240°C for each side).
Use the button "TIMER" for pre-setting, re-setting cooking time or controlling the cooking time
remained. Adjust the cooking time by pushing the arrow buttons. Time is adjustable between
1 minute (00:01) and 4 hours 00:4:00 (= 240 minutes).
When pushing TIMER button one time only, the digits for hour are active and show the cooking
time adjusted or the remaining cooking time in h:min. The left digits showing the hours are
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
60 / 80 / 100 / 120 / 140 / 160 / 180 / 200 / 210 / 240 (°C)
4 hoursn or 240 minutes (in 1 minute steps)
18