Herunterladen Diese Seite drucken

Gessi RETTANGOLO 30986 Bedienungsanleitung Seite 33

Vorschau ausblenden Andere Handbücher für RETTANGOLO 30986:

Werbung

INSTALLAZIONE - INSTALLATION - INSTALLATION - INSTALLATION - INSTALACIÓN - УСТАНОВКА
INSTALLAZIONE (continua...)
Fig. 23 - Introdurre il corpo nella propria sede fino a battuta contro la parete e fissarlo con le viti
precedentemente tolte dalla protezione. Verificare il posizionamento con una livella a bolla d'aria.
Fig. 24 - Installare la piastra di finitura sul corpo fissandone la posizione con le viti in dotazione.
INSTALLATION (continues...)
Fig. 23 - Insert the body in its seat down to the stop against the wall and fasten it with the screws
previously removed from the protection. Check the positioning with a spirit level.
Fig. 24 - Install the finish plate on the body fastening it with screws supplied.
INSTALLATION (continue...)
Fig. 23 - Introduire le corps dans son siège jusqu'à la butée contre le mur et le fixer avec les vis enlevées
avant de la protection. Vérifier le positionnement avec un niveau à bulle d'air.
Fig. 24 - Installer la plaque de finition sur le corps en fixant sa position avec les vis fournies.
INSTALLATION (folgt...)
Abb. 23 - Den Körper in seinen Sitz bis Begrenzungsanschlag an der Wand einfügen und ihn durch die
vorher aus dem Schutz herausgenommenen Schrauben befestigen. Durch eine Libelle sicherstellen,
dass der Körper ordnungsgemäß positioniert worden ist.
Abb. 24 - Die abschlussplatte auf dem Körper installieren, wobei deren Position mit den, im Lieferumfang
enthaltenen Schrauben zu fixiere ist.
INSTALACIÓN (continúa...)
Fig. 23 - Introduzcan el cuerpo en el correspondiente asiento hasta el tope contra la pared y fíjenlo con
la ayuda de los tornillos que han quitado de la protección. Verifiquen el posicionamiento con la ayuda de
un nivel con burbuja de aire.
Fig. 24 - Instalen la placa de acabado en el cuerpo, bloqueando la posición con el auxilio de los tornillos
incluidos en el suministro.
УСТАНОВКА (продолжение...)
Рис. 23 - Вставьте корпус в его гнездо, до упора в стену, и закрепите его ранее снятыми с защитной
крышки винтами. Проверьте выравнивание по жидкостному уровню.
Рис. 24 - Установите отделочную плитку в корпус, блокируя ее позицию с помощью винтов,
включенных в комплект поставки.
33

Werbung

loading

Diese Anleitung auch für:

Rettangolo 30992