BOMANN WA 7184 Bedienungsanleitung, Garantie Seite 31

Foam detection
Excessive foam forms when too much detergent is
used. This affects the wash and rinse cycle. The
function automatically checks foaming; excessive
foam is removed by an extra rinse and spin cycle.
Control panel / Functional description
NOTE:
Note that the settings, functions and additional options are program-dependent!
1 Program selector switch
To select a wash program, turn the program selector
switch to the appropriate position. For details about
the programs, see the
AUS Off-Position
To switch the appliance off, turn the program selector
switch back to the off position.
2 Spin speed
Press the button repeatedly to select the speed for
the spin cycle.
↪1400→1200→1000→800→600→400→0 (Spin stop)↩
"Program table"
.
Fill in the laundry
 Unravel the clothes before putting them into the
machine.
 Each load should correspond to the nominal ca-
pacity of the appliance. Do not overload the appli-
ance. Different strengths, sizes and types of laun-
dry can affect the actual loading capacity. It is ad-
visable to load the appliance just that a normal
circulation during washing is possible.
 Make sure that no laundries are caught between
the appliance door.
3 Temperature
Press the button repeatedly to set the desired wash-
ing temperature.
20→30→40→60→90↩
↪0 (cold)→
Mute
To activate / deactivate the acoustic signals, keep
pressing the Temperature button for approx. 3 sec-
onds.
4 Start delay
The program start can be delayed about
by repeatedly pressing the button. Select and start a
program, the device starts automatically after the
selected time has elapsed.
31
1 – 24 hours