Charging The Gyro Remote Control; Checking The Battery Status - Medion LIFE P85252 Bedienungsanleitung

Using the gyro remote control

8.4. Charging the gyro remote control

The gyro remote control is supplied with a rechargeable battery already
fitted. Before you use the remote control, charge it using the USB cable
supplied.
 To do this, switch the remote control off.
 Using the USB cable supplied, connect the Mini USB port on the remote
control to the USB port on the Lifesmart TV.
PLEASE NOTE!
The charging function will also be available in stand-
by mode if you go to the system settings and set
the "USB charging function in standby
mode" to ON (see Page 114).
Alternatively, you can also charge the gyro remote
control on a PC or a USB mains adapter.
• The status LED
• When the battery is fully charged the status LED
stay permanently red.

Checking the battery status

 You can have the battery status displayed by the status LED
pressing the
LED indicates the battery status through the number of red flashes:
Status LED
Status LED
Status LED
Status LED
Constant red flash
82 of 198
will turn red and flash during the charging process.
POWER button on the remote control briefly. The POWER
flashes four times
flashes three times
flashes twice
flashes once
will stop flashing and
> 80% battery power
> 60% battery power
> 40% battery power
> 20% battery power
Battery needs charging
by