Setup main menu
SPDIF Mode
Set the signal for the audio output via the optical SPDIF connection:
PCM-STEREO
This option produces stereo sound. Choose this setting if the sound is played
through two speakers only.
PASS-Thru
Choose this setting if the product is connected to a Dolby or DTS-capable
decoder.
19.3. Network Setup
Network Type
Specify whether the product is to be connected to a LAN network or a WLAN
network (cf. also "9.3. Network set-up" on page 84 on setting up a WLAN or
LAN connection).
DHCP
If you want the Lifesmart TV to have an IP address from the network's
DHCP server, set this function to ON.
If you set the function to OFF, it will not be allocated an IP address via the
network. As soon as you connect the Lifesmart TV to a network, you will
be asked to enter a fixed IP address for the Lifesmart TV.
116 of 198