Set-Up Location - Medion LIFE P85252 Bedienungsanleitung

• Recharge flat batteries immediately to prevent damage.
• Remove the batteries from the product if you do not intend
to use it for a relatively long period of time.
• Cover the contacts of the batteries with adhesive tape if you
want to store the batteries or dispose of them.

2.4. Set-up location

Set up and operate all the components on a stable, level and vi-
bration-free surface to prevent the device from falling down.
Do not jolt or shake the device. Jerks and vibrations may dam-
age the sensitive electronics.
Make sure that the product is not in the immediate vicinity of
heat sources (e.g. heaters or strong artificial light).
Do not place naked flames (e.g. lit candles) on or near the prod-
uct.
Make sure that the vents are never covered so as to ensure that
there is always adequate ventilation.
Do not place any objects on the cables as they may get dam-
aged.
• Position the product and mains adapter at a minimum
distance of approx. 10 cm from the wall. Ensure adequate
ventilation.
• Do not use the product outdoors as it could be damaged by
rain, snow, etc.
• Keep the product at least one metre away from sources of
high-frequency and magnetic interference (television set,
loudspeakers, mobile telephones, etc.) in order to avoid
malfunctions.
• Major changes in temperature or fluctuations in humidity
can cause moisture to build up inside the product due to
condensation and may ultimately cause an electrical short
circuit. Therefore always wait until the product has reached
room temperature before putting it into operation.
Safety instructions
69 of 198
DE
EN
FR