Herunterladen Inhalt Inhalt Diese Seite drucken

Sage BTM600 Kurzanleitung Seite 3

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
source such as a hot plate, oven
or gas hob.
• Do not place the appliance on
or near a hot gas burner, electric
element or where it could touch
a heated oven.
• Position the appliance at least
20cm from walls or heat/steam
sensitive materials and provide
adequate space above and on
all sides for air circulation.
• Do not operate the kettle on sink
drain board.
• Always ensure the appliance
is properly assembled before
connecting to a power outlet and
operating. Follow the instructions
provided in this book.
• The installation of a residual
current safety switch is
recommended to provide
additional safety when using
all electrical appliances. Safety
switches with a rated operating
current not more than 30mA
are recommended. Consult
an electrician for professional
advice.
• The glass jug must be used only
with the power base supplied.
Do not use on a range top.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
• Do not touch hot surfaces. Use
the handle for lifting and carrying
the glass jug.
• Attach the jug lid securely to the
glass jug before operation.
• Do not place anything on top of
the lid.
• Do not open the jug lid during
operation as scalding may occur.
• Extreme caution must be used
when moving the glass jug
containing hot liquid.
• Use caution when pouring water
from the glass jug as boiling
water and steam will scald. Do
not pour the water too quickly.
• To avoid scalding, never fill the
glass jug past the 'MAX' line
marking.
• Do not operate the appliance
without water. Always fill the
glass jug to at least the 'MIN'
marking. Should it be operated
without water, the boil-dry
protection will shut the power
off automatically. Allow the
appliance to cool before refilling.
WARNING
• Do not remove the glass jug from
the power base during heating or
when the basket is in operation.
Ensure the appliance has
completed the water heating
or tea brewing cycle before
removing the glass jug from the
power base.
EN
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Stm600The sage smart tea infuser

Inhaltsverzeichnis