Replacing The Filters - WOLFF Vacuclean 2 Original Bedienungsanleitung

5.4

Replacing the filters

To replace the filters, proceed as follows:
Turn off the vacuum cleaner by pressing the motor STOP buttons.
Disconnect the vacuum cleaner plug from the power socket.
Important!
Wear individual protection devices.
Release the two retainers that hold the motor head in place. Lift the motor head and rest this on a flat
surface being careful not to damage the power cable.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10
E-Mail tools@uzin-utz.com | Internet www.wolff-tools.de
27