Power Button; Filter Change Indicator; Night Mode - Beko ATP3100N Bedienungsanleitung

5 Operat ng Instruct ons
• Carefully unpack your air purifier.
• Select a firm level place where there are
no obstructions to the air inlet grill or air
outlet.
• Remove all PE bags from filters before
use.
• Do not point air outlet towards wall.
6 Introduct on for Operat on

Power Button

Push the Power button, the machine will
start running under the default Medium
fan setting, and the indicator Medium
fan setting will illuminate.
Fan speed button
There are 4 speed setting including
Sleep, Low, Medium and High fan levels
for selection. Touch the Fan speed but-
ton to select your desired speed setting.
The default air speed is medium level

Night Mode

Only the wireless charging and Ionizer
work on this mode. All icons are off.
Air purifier/ Instruction Manual
Power Button
Power Button
Sleep Mode
On this mode, fan speed is sleep level.
Back cover indicator
Make sure that the back cover is com-
pletely closed before operating. Other
wise, If the icon blinks,the machine is not
operating.

Filter change indicator

If this icon starts blinking, HEPA filter is
needed to be changed with the new one.
9 / EN