Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DIGITAL
AUDIO
1
BACK VIEW
1.
Digital Audio Ouput Connector
This is a digital audio output connector or Video CD output connector.
You can connect this to the digital audio system or Video CD Board.
2.
Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
The supplied audio cable is a SoundBlaster
sound card, you will need to contact the sound card manufacturer to obtain the
proper cable for that card.
3.
Master / Slave / CSEL Jumper
These three jumpers are used to set the CD-ROM Drive to either a Master, Slave,
or CSEL drive.
Refer to section HARDWARE INSTALLATION.
4.
Interface Connector
This 40-pin connector is used to transfer and control signals between the
CD-ROM Drive and your PC.
Connect the 40-pin IDE cable in your PC to this connector.
5.
Power-in Connector
Attach a power cable from the computer to this connector.
ANALOG
AUDIO
D
G
R
G L
C S M
39
40
S L A
2
3
Figure 2. Back View
INTERFACE
1
2
4
®
type cable. If you have a different
E-6
POWER
+5
+12
GND
5
Werbung
Inhaltsverzeichnis
