Inhaltsverzeichnis
Werbung
To set access control rule with rate limiter on switch
Argument:
<id> : 1-16
<rate> : 1,2,4,8,16,32,64,128,256,512,1000,2000, 4000,8000,
16000,32000,64000,128000,256000,512000,1024000
Possible value:
<id> : 1-16
<rate> : 1,2,4,8,16,32,64,128,256,512,1000,2000, 4000,8000,
16000,32000,64000,128000,256000,512000,1024000
Example:
GS-2124L(acl)# ratelimiter 3 16000
GS-2124L(acl)#
set
Syntax:
set [<index>] [<next index>]
[switch | (port <port>) | (policy <policy>)]
[<vid>] [<tag_prio>] [<dmac_type>]
[(any) |
(etype [<etype>] [<smac>]) |
(arp [<arp type>] [<opcode>]
(any | [<source ip>] [<source ip mask>])
(any | [<destination ip>] [<destination ip mask>])
[<source mac>] [<arp smac match flag>]
[<raro dmac match flag>] [<ip/ethernet length flag>]
[<ip flag>] [<ethernet flag>]) |
(ip [(<source ip> <source ip mask>) | any]
[(<destination ip> <destination ip mask>) | any]
[<ip ttl>] [<ip fragment>] [<ip option>]
[(icmp <icmp type> <icmp code>) |
(udp <source port range> <destination port range>) |
(tcp <source port range> <destination port range>
Kapitel 5: Operation of CLI Management (englisch)
LANCOM GS-2124
175
Werbung
Inhaltsverzeichnis
