LANCOM GS-2124 Bedienungsanleitung Seite 161

LANCOM GS-2124
Kapitel 5: Operation of CLI Management (englisch)
160
restore user
Syntax:
restore user
Description:
To restore the startup configuration as user defined configuration. If
restoring default successfully, the CLI would prompt if reboot immediately
or not. If you press Y or y, the system would reboot immediately; others
would back to the CLI system. After restoring user-defined configuration,
all the changes in the startup configuration would be lost. After
rebooting, the entire startup configuration would replace as user defined
one.
Argument:
None.
Possible value:
None.
Example:
GS-2124L# restore user
Restoring ...
Restore User Configuration Successfully
Press any key to reboot system.
save start
Syntax:
save start
Description:
To save the current configuration as the start one. When you enter this
command, the CLI would save your current configuration into the non-
volatile FLASH. If you want the configuration still works after rebooting,
save the configuration using the command 'save stat'.
Argument:
None.
Possible value:
None.
Example:
GS-2124L# save start