GB
F
D
REVERSING THE DIRECTION OF ROTATION
The direction of rotation of the drill may be changed by
the use of the reverse lever on the switch, situated above
the trigger. The position of this should only be changed
when the drill is at a standstill.
The reverse lever has two positions:
Clockwise rotation: Set the reverse lever to the right
■
position.
Anti-clockwise rotation: Set the reverse lever to the
■
left position.
Important
When hammer drilling, you do not need to force
the drill. Too much pressure will place unnecessary
load on the motor. Check the drill bits regularly.
Re-sharpen or replace blunt drill bits.
LIVE TOOL INDICATOR
This tool features a live tool indicator (7) which
illuminates as soon as the tool is connected to the supply.
This warns the user that the tool is connected and will
operate when the switch is pressed.
E
I
P
NL
S
DK
N
FIN
GR
English
MAINTENANCE
Unplug the hammer drill before making any adjustment,
■
servicing or cleaning the tool.
Keep your machine clean at all times.
■
Never use caustic agents to clean the plastic parts.
■
At the end of your work, to prevent dust deposits you
■
should use compressed air (max. 3 bar) to clean out
the ventilation slots.
Check the carbon brushes regularly (dirty or worn
■
carbon brushes result in excessive sparking and
speed faults).
9
RO
H
CZ
RUS
HR
PL
SLO
TR