Tips For Correct Application - be cool BC5AC2001FTL Bedienungsanleitung

To switch on the appliance automatically, please proceed as follows:

While the AirCooler is on standby, press the TIMER button repeatedly until the
desired number of hours lights up.
IONISER
The AirCooler is equipped with an ioniser. This distributes ionised air into the rooms and
removes static charge.

Press the IONISER button to start or stop ionisation.

The display lights up on the control panel.
The resulting atoms and molecules promote the chemical degradation process and can be
COOL AIR
 Use the COOL button to start the function.
 Make sure that the water level indicator is above the MIN level.
 As soon as the button is pressed, the appliance starts pumping water against the water
filter to create cold and moist air, that is then blown out of the appliance.
OSCILLATION

Use the SWING button to activate the oscillation of the appliance. The display lights
up on the control panel.

To deactivate the function, press the SWING button again.
This function allows the blown-out air to be distributed to the left and right. This enables

TIPS FOR CORRECT APPLICATION

Here are some tips to get the very best out of the air cooler:
Protect the room from direct sunlight with curtains, blinds or shutters.
This saves you energy.
Do not place any objects on to the appliance, and do not obscure the air outlet.
Keep the grilles clear.
Make sure that no heat sources are operating in the room.
Never use the appliance in very humid rooms (e.g. laundry rooms).
Do not use the appliance outdoors.
Make sure that the appliance is on level flooring and that the locking brakes are applied.
NOTE
used to eliminate odours and disinfect the air.
NOTE
horizontal air distribution in the room.
Seite 22 von 134