Preparing For Installation; Required Tools - Sulion ASPEN Bedienungsanleitung

Preparing for installation

Note: The estimated installation time is 120 minutes. This product can only be installed by a certified electrician.
Carefully separate the fan's parts, avoiding the use of cutters or blades that could scratch any part of it.
Remove all pieces. Place the motor on top of a rag or soft surface to avoid damaging its finish. Handle it carefully to prevent
its casing from becoming bent or scratched.
The fan must be placed on the ground or on a table that is sufficiently large such that no pieces may fall.
Verify that all parts are present before starting assembly. Check the packaging to find elements believed to be missing. Exa-
mine all elements. You must have the following:
Description Quantity
1
Ceiling bracket
1
Receiver
1
Top canopy
1
Shaft (100mm)
1
Shaft (255mm)
1
Body/motor canopy
1
Body/motor

Required tools

Phillips-head screwdriver and flat-head screwdriver for flat-head screws.
Safety ladder.
Electric drill.
Photo Description
Blades
Blade balancing kit
LED PCB
Diffuser
Installation kit
Remote control kit
Instructions manual
13
Quantity Photo
3
1
1
1
1
1
1
EN