hanseatic HKS8555GEW Gebrauchsanleitung Seite 60

Page EN-26 Changing the door hinges
7. Place the cover back on the refrigerator.
Push down on both sides (left and right)
of the front of the cover until you hear it
click into place.
8. Screw the two screws tightly back onto
the cover. To do this, use a cross-head
screwdriver. Secure the two screw cov-
ers.
9. Tilt the refrigerator backwards (maximum
45°) to allow you to adjust the lower door
hinge also.
10. Unscrew both front screw feet.
11. Unscrew the lower hinge plate. To do
this, use an 8 mm spanner or a cross-
head screwdriver.
12. Remove the door.
13. Remove the plastic insert from the un-
derside of the door.
14. Insert the loose plastic insert supplied
into the new hinge stop side and firmly
screw in.
15. Turn the lower hinge plate. Loosen the
hinge bolts with a 10 mm spanner. Loos-
en the screws and reinsert the screws
and the hinge bolts from the other side.
16. Replace the door.
17. Screw the hinge plate tightly back onto
the opposite side. Make sure that the
hinge pin is in the hinge bushing of the
door.
The door will now function properly again.
18. Firmly screw both screw feet back onto
the refrigerator.
19. Carefully stand the refrigerator upright.