Herunterladen Inhalt Inhalt Diese Seite drucken

After Each Use; Battery Removal; Recycling - Remington Omniblade Face & Body HG3000 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

CARE FOR YOUR GROOMER
Care for your product to ensure a long lasting performance. We recommend that you clean
your groomer after each use.

AFTER EACH USE

Brush any accumulated hairs from the groomer and attachment heads.
The easiest and most hygienic way to clean the groomer is by detaching the head from
the groomer body and rinsing the head with warm water.
Place one or two drops of cutter oil or sewing machine oil on the blades.
Turn the device on to distribute the oil evenly, wipe off any excess oil.

BATTERY REMOVAL

We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled correctly.
The rechargeable battery must be removed from the appliance before it is scrapped.
1. Ensure the trimmer is discharged of all power. To do this, operate the device until it
stops.
2. Remove any attachments.
3. Pry off the switch button/switch cover.
4. Unscrew the 2 screws under the cover then remove the lower housing.
5. Slide out the battery assembly.
6. Unscrew the 2 screws from the cover then remove the battery.
The battery is to be disposed of safely.
Do not attempt to operate the device once you have opened it.

RECYCLING

W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis