How To Use; Important Safety Instructions - Remington NE100C Bedienungsanleitung

2
080224_REM_IFU_NE100C.indd GB2 080224_REM_IFU_NE100C.indd GB2
ENGLISH

HOW TO USE

TO REMOVE HAIR FROM NOSE – DIAGRAM 2
Insert clipper's cutting unit gently into the nostril.
Gently move the cutting edge in and out of the nostril whilst
gently rotating the clipper.
Avoid inserting the cutting unit more than 6mm into your
nostril.
TO REMOVE HAIR FROM EYEBROWS – DIAGRAM 3
Attach the linear trimmer.
Gently guide cutting unit to stray, unwanted hairs along the
eyebrow line or protruding from the eyebrow itself.
To remove the hairs completely lower onto the skin and move
over desired area.
Use slow and well-controlled movement.
TO REMOVE HAIR FROM EAR – DIAGRAM 4
Insert clipper's cutting unit gently into the outer ear canal
opening.
Gently rotate clipper in a circular motion.
Avoid inserting the cutting unit more than 6mm into your
ear canal.
NOTE: Do not apply excessive pressure as this damages the
clipper head and may cause skin injury.
CARE FOR YOUR CLIPPER
Care for your product to ensure a long lasting performance. We
recommend you clean your clipper after each use. The easiest and
the most hygienic way to clean the clipper is by rinsing the product
head after use with warm water. Always keep the clipper in the
"off" position when not in use.
AFTER EACH USE
Rinse the accumulated hair from the cutters and shake off
excess water.
Wipe the main unit with a damp cloth and dry immediately.
CLEANING CAUTIONS
Cleaning should only be done with a soft brush.
Do not use harsh or corrosive cleaners on the units or their
cutters.
Do not apply pressure or hard objects to cutters.
Do not submerge in water as damage will occur.
Suitable for cleaning under water

IMPORTANT SAFETY INSTRUCTIONS

Always store this appliance in a moisture-free area. Do not
store it in temperatures exceeding 140°F (60°C).
01.06.2008 23:13:07 Uhr 01.06.2008 23:13:07 Uhr