Herunterladen Inhalt Inhalt Diese Seite drucken

WERTHER INTERNATIONAL 404M Manuel D’instructions Pour L’utilisation Et L’entretien Du: Bedienungs- Und Wartungsanleitung Seite 16

Hydraulikheber
Inhaltsverzeichnis

Werbung

14
CAP.3
SICUREZZA
É estremamente importante leggere questo capitolo attentamente ed in
ogni sua parte poichè contiene importanti informazioni sui rischi che
operatore e manutentore possono correre in caso di un uso errato della
traversa.
Nel testo che segue troverete chiare spiegazioni su alcune situazioni di
rischio o pericolo che si possono verificare durante l'uso e la manuten-
zione della traversa, sui dispositivi di sicurezza adottati e sul loro uso
corretto, sui rischi residui e sui comportamenti da tenere (precauzioni
generali e specifiche per eliminarli o neutralizzarli).
I
ATTENZIONE:
Le traverse sono state progettate e costruite per il
sollevamento dei veicoli posizionati su di un ponte
sollevatore a 4 colonne.
Ogni altro uso non è consentito ed in particolare
esso non è idoneo per operazioni di:
- lavaggio e verniciatura;
- ponteggio o sollevamento di persone;
- pressa per schiacciare;
- montacarichi;
Il costruttore non risponde di alcun danno a persone,
veicoli od oggetti causati dall'uso improprio o non
consentito della traversa.
NON UTILIZZARE LA TRAVERSA SENZA LE
PROTEZIONI O CON LE PROTEZIONI DISATTIVATE.
IL MANCATO RISPETTO DI QUESTE NORME PUO'
RECARE GRAVI DANNI ALLE PERSONE, ALLA
TRAVERSA ED AI VEICOLI SOLLEVATI.
CHAPTER 3
SAFETY
It is vital to read this chapter of the manual carefully and from begin-
ning to end as it contains important information regarding the risks that
the operator or maintenance fitter may be exposed to in the eventuality
that the hydraulic beam is used improperly.
The following text contains clear explanations regarding certain situa-
tions of risk or danger that may arise during the operation or maintenan-
ce of the hydraulic beam, the safety devices installed and the correct
use of such systems, residual risks and operative procedures to use
(general and specific precautions to eliminate potential hazards).
I
WARNING:
The hydraulic beams are designed and built to lift
vehicles on 4-posts lifts. All other uses are unauthori-
sed. In particular, the lift is not suitable for:
- washing and respray work;
- creating raised platforms or lifting personnel;
- use as a makeshift press for crushing purposes;
- use as goods lift;
The manufacturer disclaims all liability for injury to
persons or damage to vehicles and other property
caused by the incorrect and unauthorised use of the
hydraulic beam.
DO NOT USE THE HYDRAULIC BEAM WITHOUT
PROTECTION DEVICES OR WITH THE PROTECTION
DEVICES INHIBITED.
FAILURE TO COMPLY WITH THESE REGULATIONS
CAN CAUSE SERIOUS INJURY TO PERSONS, AND
IRREPARABLE DAMAGE TO THE LIFT AND THE
VEHICLE BEING LIFTED.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

404p

Inhaltsverzeichnis