Revo Superconnect Bedienungsanleitung Seite 42

SYSTEM SETTINGS
TIME / DATE
Found in the SYSTEM SETTINGS menu, this menu offers you the option
of changing a number of time/date related settings. The TIME/DATE
menu has three listings as follows:
SET TIME / DATE : Allows you to manually set the time/date.
AUTO UPDATE : Choose from three different automatic setting options.
SET FORMAT : Choose whether you would like to use 12hr or 24hr
formats.
Update from DAB :
Automatically takes time/date from DAB signal. SUPERCONNECT
needs to have been operated in DAB MODE (and have received a
signal) before this information can be extracted.
Update from Network :
Takes time/date from your internet connection.
CONTRAST
SUPERCONNECT allows a degree of control over the contrast of its
OLED display, meaning that both its STANDBY and POWER ON contrast
levels can be independently set to either HIGH, MEDIUM or LOW
brightness levels.
To change the contrast settings, press
followed by SYSTEM SETTINGS. Now select CONTRAST from the menu
list. You will now be able to modify the default brightness level settings
for the two modes of operation - STANDBY and POWER ON. Select the
mode you'd like to change from these two options, then choose your
desired brightness level. Your chosen settings will be held in memory
indefinitely, but can be changed at any time.
42
then select MAIN MENU,
Time/Date
Set Time/Date
Auto update >
Set format
Set timezone >
Time/Date
Daylight savings
Set Time/Date
Auto update >
Set format
Auto update
Set timezone >
Update from DAB
Daylight savings
Update from Network *
No update
Auto update
Update from DAB
Update from Network *
Brightness
No update
Power-On Level *
Standby Level
Brightness
Power-On Level *
Standby Level
Language Time/Date
Set Time/Date
English *
Auto update >
Danish
German Set format
Set timezone >
Italian
Language
Daylight savings
Norweigian
English *
Danish
Factory Reset
German Auto update
Italian
Update from DAB
Norweigian Proceed?
Update from Network *
No update
NO
Factory Reset
Proceed?
Software update
Brightness
Auto-Check setting NO *
Power-On Level *
Check now
Standby Level
Software update
Auto-Check setting *
Check now
Setup Wizard Language
English *
Start now?
Danish
German
Italian
Setup Wizard
NO
Norweigian
Start now?
Factory Reset
Info
SW version: NO
Proceed?
domino_V2.0.16.25756-5
Radio ID:
NO
00226100C3D6
Info
SW version:
domino_V2.0.16.25756-5
Software update