Axis Q3517-LV Installationsanleitung Seite 12

AXIS Q3517–LV Network Camera
5. Route the cable through the hole in the side lid.
6. Attach the side lid to the mounting bracket with the locking clip.
7. Wind the network cable along the grooves on the mounting bracket to keep extra cable
length that may be required later.
Route the cables through the wall
1. Use the drill template to drill four holes for the mounting bracket, and one hole for
each cable.
2. Attach the mounting bracket to the wall with appropriate screws.
3. Route the network cable through the wall and the mounting bracket.
12