Use; Maintenance And Storage; Troubleshooting - Imetec S0901 Bedienungsanleitung

WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
• Adjust the thermostat (1) to the required temperature.
• For a continuous functioning, adjust the thermostar (1) to the MAX position.
Anti-freeze function (where available)
• This function assures maintaining the room temperature at around +5°C. When the temperature drops
down below this level, the fan heater turns on automatically.
• Adjust the room thermostat (1) to the minimum temperature.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
The fan heater may be cleaned using a soft, slightly damp cloth. Dry well after cleaning.
WARNING! Once you have finished using this appliance,
make sure it has cooled down completely before putting it
away.
Keep the fan heater in a cool, dry place, out of reach of children.
NOTE: When you put the fan heater away, make sure it is well-protected from dust.
In the event that one the following problem should occur, adopt the proposed solution.
Problem
The product emanates a "burnt" smell
The product does not work

USE

MAINTENANCE AND STORAGE

TROUBLESHOOTING

Check for the presence of any dust residues and proceed
with cleaning as indicated in the MAINTENANCE AND
STORAGE chapter
Make sure that the thermostat (1) is not positioned on the
minimum temperature / antifreeze position (where present)
Solution
EN
13