Led Display - SEH ThinPrint Reader TPR-10 Schnelle Installationsanleitung

Properties
Operating environment
Dimensions

LED Display

The LEDs of the TPR-10 give you information about its status.
LED
Activity
Network status
Smart card
reader status
6
Values
- Ambient temperature: 5–40 °C
- Relative humidity:
- Width:
- Height:
- Depth:
- Weight:
Action Color
blinks at green
irregular
intervals
flashing grün
permanently on green
permanently on orange
permanently on red
permanently off -
permanently on green
lighting up once green
(1 s)
lighting up once red
(1 s)
20–80 %
140 mm
32 mm
99 mm
150 g
Description
Indicates the exchange of network data packets.
The device is in the BIOS mode.
There is a connection on both network
connectors.
There is no connection on the network
connector 1 or 2.
There is no connection on the network
connectors.
An error occurred on the smart card reader.
The smart card reader is ready to operate.
A card is recognized on the smart card reader.
NOTE: In addition, you will hear a short beep.
A card is not recognized on the smart card
reader.
NOTE: In addition, you will hear a long beep.
[en] Quick Installation Guide