Restrictions For The Sub Remote Controller - Mitsubishi Electric PAR-32MAAG Bedienungshandbuch

Setting and display
items
Night setback
Filter information
Error information
Maintenance Manual vane
angle
Initial Clock
setting
Main
display
Contrast
Language
selection
Service Function
setting
(City Multi)

Restrictions for the sub remote controller

Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor
Use to make Night setback settings.
•Select "Yes" to enable the setting, and "No" to disable the setting.
The temperature range and the start/stop times can be set.
* Clock setting is required.
* 1ºC increments
Use to check the filter status.
•The filter sign can be reset.
Use to check error information when an error occurs.
•Error code, error source, refrigerant address, unit model,
manufacturing number, contact information (dealer's phone
number) can be displayed.
* The unit model, manufacturing number, and contact information
need to be registered in advance to be displayed.
Use to set the vane angle for each vane to a fixed position.
Use to set the current time.
Use to switch between "Full" and "Basic" modes for the Main
display.
•The default setting is "Full."
Use to adjust screen contrast.
Use to select the desired language.
Use to make settings for indoor unit's functions.
Page
Setting details
The following settings cannot be made
from the sub remote controller. Make these
settings from the main remote controller.
"Main" is displayed in the title of the Main
menu on the main remote controller.
•Timer
(On/Off timer, Auto-Off timer)
•Weekly timer
•OU silent mode
•Energy saving
(Auto return, Schedule)
•Night setback
•Maintenance
(Manual vane angle)
Reference
page
43
54
56
45
25
48
49
50
52
19