Tips And Notes; Maintenance And Care; Technical Data - Conrad 75 50 04 Bedienungsanleitung

Setting a new access code
• Open the safe door as described above.
• A small button is hidden at the back of the safe door (close to the
hinge on the inside; see circled area in the image to the right.
Briefl y press the button. The yellow LED lights up and 2 beeps
will be heard.
• Enter a 3 to 8-digit code and then briefl y press either the asterisk
or the hash key. If two beeps are heard, the new code is saved.
If the yellow LED fl ashes and 3 beeps are heard, the code is
invalid (e.g. when a 2-digit code was entered). Start over entering
a new code; see above.

Tips and Notes

• The product is suitable for storing valuables or to protect them from unwanted access.
Anti-theft protection is realised through its design, i.e. steel casing, door and lock construc-
tion. Unauthorised access to the items stored in the safe is thus hindered.
• When opening/closing the safe, make sure you are not observed by anybody during this time.
• Due to the thick door with the contained lock mechanics, only a part of the inside space is
available. Close the door carefully; do not apply force! Otherwise, items inside the safe may
be damaged.
• Never store the enclosed keys inside the safe. If you forget the code, it will not be possible to
open the safe!
• If you have forgotten the access code, open the safe with the key enclosed and set a new
access code.

Maintenance and Care

• Apart from the occasional battery change, the product is maintenance-free for you.
• The outside of the safe should only be cleaned with a clean, soft, dry cloth. Never use aggres-
sive cleaning agents or chemical solutions as the surface of the housing could be damaged
(discoloured).
Disposal
a) Product
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Remove the inserted batteries and dispose of them separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable
batteries. Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to
indicate that disposal in the domestic waste is forbidden. The symbols for the rele-
vant heavy metals are: Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries/
rechargeable batteries, e.g. under the rubbish bin symbol shown to the left).
You can return your used batteries/rechargeable batteries free of charge to the offi cial col-
lection points of your community, in our stores, or everywhere where batteries/rechargeable
batteries are sold.
You thereby fulfi l your statutory obligations and contribute to the protection of the environment.

Technical Data

Power supply ........................ 4 batteries of type AA/Mignon
Dimensions .......................... Outside: 200 x 310 x 200 mm (H x W x D)
Inside: 195 x 305 x 140 mm (H x W x D)
Door cut-out .......................... 135 x 210 mm (H x W)
Wall thickness ....................... Housing: 1.5 mm; door: 3 mm
Weight .................................. 4.92 kg
☞
Variations in dimensions and weight are dependent on the production technique.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.