Technical Data; Tips And Notes; Maintenance And Care - Conrad 75 50 05 Bedienungsanleitung

Setting a new master code
• First of all, open the safe door as described above.
On the back side of the safe door (near the door axis on the
inside of the door), there is a hidden button, see the circle on
the fi gure on the right.
• Briefl y press the button.
Now, 6 dashes ("- - - - - -") are blinking on the display.
• Press the "START" button briefl y.
• Enter a new 6-digit master code (e.g. 334499).
When the input is fi nished, "In" appears of the display and a
sound signal is generated. The new master code is saved.
Setting a new user code
• First of all, open the safe door.
• Press the "START" button briefl y.
6 dashes ("- - - - - -") will appear on the display.
• Enter a new 6-digit user code (e.g. 773388).
• Then press briefl y the button on the back side of the safe door (near the door axis on the
inside of the door), see the circle on the fi gure above.
"In" appears of the display and a sound signal is generated. The new user code is saved.

Tips and Notes

• The product is designed for storage of valuable objects or protection against unauthorised
access.
The break-in protection is achieved by constructive solution, i.e. by steel sheet body frame,
door and lock design. The solution perplexes unauthorised access to the valuable objects
stored in the safe.
• When opening/closing the safe, make sure you are not viewed by anybody.
• Thick door with lock mechanics contained therein prevents from access to the interior of the
safe. Close the door cautiously, do not use excessive force! Otherwise you can damage the
objects kept in the safe.
• Never keep in the safe both keys provided. It would be impossible to open the safe if you
forget your user or master code!
• If you forget your master or user code, open the safe with the key provided, and set the new
master or user code.

Maintenance and Care

• Apart from the occasional battery change, the product is maintenance-free for you.
• Clean the safe occasionally with a clean, soft, dry cloth. Never use aggressive cleaning
agents or chemical solutions as the surface of the housing could be damaged (discoloured).
Disposal
a) Product
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Remove any batteries inserted and dispose of them separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable
batteries. Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to
indicate that disposal in the domestic waste is forbidden. The symbols for the rele-
vant heavy metals are: Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries/
rechargeable batteries, e.g. under the rubbish bin symbol shown to the left).
You can return your used batteries/rechargeable batteries free of charge to the offi cial collec-
tion points of your community, in our stores, or everywhere where batteries or rechargeable
batteries are sold!
You thereby fulfi l your statutory obligations and contribute to the protection of the environment.

Technical Data

4 batteries of type AA/Mignon
Dimensions ........................... overall: 250 x 350 x 250 mm (H x W x D)
overall, with rotary knob: 250 x 350 x 280 mm (H x W x D)
internal: 245 x 345 x 190 mm (H x W x D)
Door cut-out .......................... 183 x 230 mm (H x W)
Wall thickness ....................... Casing: 1,5 mm; Door: 4 mm
Weight .................................. 7,6 kg
☞
Variations in dimensions and weight are dependent on the production technique.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.