7. Dismantling and Re-Installation
6.
When the outer ring reaches the support
ring the oil pressure will automatically
increase. The connection is now
released.
WARNING
At this point fully release the oil
pressure. Ensure that the oil
pressure does not exceed 180 bar.
7.
Release the oil pump from the connec-
tion "Entspannen" (Loosen).
NOTE
Collect any hydraulic oil leakage
coming out of the "Spannen"
(Tighten) connection.
8.
Leave the hydraulic oil in the loosened
shrink disc and tightly close the
connections "Spannen" (Tighten) and
"Entspannen" (Loosen) once more with
screw plugs.
34