Glamox MPP-SEN Bedienungsanleitung Seite 8

GLAMOX MPP-SEN
Welcome as an owner of a Glamox MPP-SEN system. MPP-SEN
is a multi- sensor with a light sensor, PIR and a IR sensor for remote
control. 3 different components can be connected to the system.
1) Slave luminaires (with DALI ballast/drivers)
2) Push Button Units (PBU)
3) Extension PIR to extend the coverage area
Do not start the commissioning until you have finalized the
installation. Use remote control IRT9099/00 as commissioning
tool.
Different modes
It is possible to choose between 15
different modes on Glamox MPP-SEN.
Each mode has a unique setting that
fits different applications. Daylight
configuration is the same in all modes
with the exception of mode 7 that does
not have daylight regulation. Mode
12–15 can be specially set from the
supplier.
8
Configuration modes
There are 2 different configuration modes on the Glamox MPP-SEN
1) Window/corridor = A stand alone setting with 2 DALI
outputs (DALI 1 and DALI 2) that defines 2 daylight areas.
No commissioning required if default settings are OK.
2) Parallel linking = makes the system interact with each other
by communicating presence from one system to the next.
Action from the systems receiving the command depends on
which modes it is set to.
How to set the different configuration modes
1. Press "Config"
2. Select your configuration
"2" = Parallel linking
"3" = Window/corridor
3. Wait until the red LED stops blinking
4. Point the front of the remote to the multi sensor
LRI1663 and press the green send button
Setting mode
1. Press "1 - 15"
2. Select your mode to be made active
For mode 1 press "1" or "0" followed by "1"
For mode 14 press "1" followed by "4" etc.
3. Wait until the red LED stops blinking
4. Point the front of the remote to the multi sensor
LRI1663 and press the green send button
Finding current mode
1. Press while pointing the remote
to the multi sensor LRI1663
2. All lights will go to minimum level
3. The number of flashes have to be counted and
represents the mode number
4. The lights will go back to their previous situation