100% trajecta SM Benutzerhandbuch Seite 12

HELMET CARE AND IMPACT
WARNING
DO NOT WEAR THE HELMET AFTER AN IMPACT FOR ANY REASON, EVEN IF THERE IS NO VISIBLE
DAMAGE TO THE SHELL. THE HELMET IS MADE FOR ABSORBING IMPACT THROUGH AN ALTER-
ATION OR PARTIAL DESTRUCTION OF SOME OF ITS PARTS, AND DAMAGE MAY NOT BE VISIBLE.
FOR THIS REASON, THE HELMET MUST BE DESTROYED OR REPLACED AFTER IMPACT. IF YOU
HAVE ANY QUESTIONS WHETHER YOUR HELMET SHOULD BE REPLACED, YOU CAN CALL YOUR
LOCAL DEALER OR 100% FOR FURTHER INSPECTION.
WARNING
DO NOT MAKE ANY MODIFICATION TO THIS HELMET. Do not make any modification on the chin
strap, or interior. Do not cut, drill or extract any parts from helmet. Doing so could reduce the Impact
absorption features of the helmet. No attachments shall be made to the helmet except those recom-
mended by the manufacturer and any modification to the helmet will void all warranties. Do not expose
this helmet to direct or indirect heat, such as leaving it in the sun or a hot car. Heat may damage the
internal substructure and damage or destroy the helmet. This helmet has a limited life span and should
be replaced when it shows obvious signs of wear, or has been subject to any impact or accident. The
helmet shall be replaced after 5 years from the production date. Use only genuine parts and accesso-
ries.
WARNING
Helmet can be damaged by contact with common substances. This damage may not be visible to the
user. The most common substances that may damage the helmet include; ammonia, bleach, cleaners
and solvents. Which will nullify the warranty conditions and can cause damage to the helmet potentially
rendering the helmet ineffective in an accident. The protection of this helmet may be severely reduced
by the application of paint, adhesive stickers or transfers, cleaning fluids or other solvents.
Clean the interior and exterior of your helmet regularly. Use a soft cloth with a mild detergent and
lukewarm water solution to clean both the inside and outside of your helmet. The fit pads are easily and
fully removable, as well as being completely hand washable. Carefully hand wash and air-dry the fit
pads when needed. Moist fit pads should be removed and dried, out of direct sun exposure.
CRASH REPLACEMENT POLICY
Here at 100% we understand accidents happen. If you were in an accident and your helmet suffered from any
impact, please contact 100% directly and request a CRA (Crash Replacement Authorization) Number and we
will inspect it. Once inspected, if the damage shows it was indeed from an accident and not intentional, you
may be eligible for a 30% discount on a replacement helmet.
Trajecta Manual 03.indd 12 3/25/19 4:15 PM