Ugur UOF 1 Bedienungsanleitung Seite 44

D- USING YOUR COOLER
Setting the internal temperature of your cooler
Internal temperature of your device has been factory set in a manner that it will protect your food
without causing them spoiled.
Protection temperature of the food can be observed from the digital thermometer furnished to your
device or thermometer located on the inner side of your device and set by means of the electronic
thermostat.
Set value of the device has been adjusted at the production plant as +2°C. This value is the value that
can protect the products inside of your device without spoiling under any conditions.
When you run your product at factory set value, you get the best result in terms of both the perfor-
mance and energy consumption.
Run your device empty for at least three (3) hours. Therefore inside of your product will be cooled
down in the best way.
Your device has been set in a manner that operates under the ambient temperature of +25°C and
relative humidity of 60%
Internal temperature of your product can be set between +2°C and +12°C.
EN
44