Precautions For Installing The Printer - Citizen CT-S601 II Benutzerhandbuch

3.7 Precautions for Installing the Printer

The printer can be used horizontally, vertically, or installed on a wall. However,
the CT-S601IIS (built-in power supply type) cannot be used vertically or installed
on a wall.
Use the optional stand for vertical applications, and the optional brackets for
wall installations. Please refer to the manual for further details.
Horizontal position
Change the paper near-end sensor settings for vertical and wall installations. (The
factory setting for the paper near-end sensor is for horizontal installations.)
CAUTION
Do not use the printer under the following conditions.
 Locations subject to vibration or instability.
 Locations that are very dirty or dusty
 Locations where the printer is not level.
• The printer may fall and cause an inju ry.
• The quality of printin g may deterior ate.
 Oriented other than as specified.
• The printer may malfunction , be damag ed, or cause an electric shock.
Precautio ns for horizontal installatio ns
 Do not set cutting to full cut. Doing so may cause cutter jams.
Precautio ns for vertical/w all installa tions
 Adjust the paper near-end sensor.
Precautio ns for vertical installatio ns
 The optional stand may fall over when you pull on partially cut thick paper.
Do not use thick paper.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Wall installation
Refer to 3.10 Adjusting the Paper Near-end Sensor
— 32 —
V10 CONSUMIBLES S.L.
Vertical position