Starting - Wilks USA TX750 Bedienungsanleitung

TX750 / TX750i

Starting

Before starting, connect the gun and hoses as described in 'Connections'
Turn the fuel tap on by
sliding to the right
Pull recoil handle firmly to
start engine
Once running and the engine has warmed up, return the choke to the right (open)
position.
If restarting a warm engine there is no need to move to the left.
Set the choke to the left
(closed position)
Once running pull throttle
to the left (open position)
© Wilks-USA
English
Turn the engine switch to
the on position
Turn on water supply
OFF
7