Panasonic DELUXE XE Serie Kurzanleitung Seite 8

REMOTE CONTROL
Press and hold for 5 seconds to dim or restore the
11
unit's indicator brightness.
Press and hold for approximately 10 seconds to
12
show temperature setting in °C or °F.
13 Press to restore the remote control's default setting.
14 Not used in normal operations.
TIMER
ON
11
1
12
OFF
14
SET CHECK CLOCK
The unit stops and the timer indicator blinks.
Use remote control to retrieve error code.
Press for 5
1
seconds.
Press for 5
3
seconds to
quit checking.
4
Turn the unit off and reveal the error code to authorized dealer.
8
All manuals and user guides at all-guides.com
SET
2 3
CANCEL
AC
RC
13
RESET
TIMER
2
ON SET
3
1 2
OFF CANCEL
AC RC
SET CHECK CLOCK RESET
TO SET THE TIMER TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
1
OFF
Select ON or OFF timer
• Example of application at living room:
Morning: ON at 07:00 (Wake up)
OFF at 08:00 (Out for work)
Evening: ON at 17:00 (Back home)
OFF at 22:00 (Sleep)
• To cancel ON or OFF timer, press
select respective
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
to select respective
OFF
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
Press until you hear
beep sound, then
write down the error
code.
Cancel
2
SET
Cancel
Set the
Confi rm
time
ON
or to
OFF
or then press .
CANCEL
ON
or
SET
or then press
Note:
• For certain errors, you
may restart the unit for
limited operation with 4
beeps during operation
starts.
.