Mast Mounting - Siemens ANT793-6DG Kompaktbetriebsanleitung

3.2.3

Mast mounting

Overview
①
Mast
②
Hose clips (2)
Note
The hose clips are suitable for a mast diameter of 25 mm to 85 mm.
Requirement
④
The support is mounted on the rotating mounting bracket
Procedure
Secure the rotating bracket
above.
Place the two hose clips so that they fit into the notches of the rotating bracket. The
tightening torque is 5 Nm.
Antenna ANT793-6DG
A5E03484067-05, 05/2019
③
Rotating bracket
④
Support
③ ①
to the mast
③
.
using two hose clips
Installation
②
as shown
35