Installation; Direct Wall Mounting - Siemens ANT793-6DG Kompaktbetriebsanleitung

N-Connect/N-Connect connecting cable
For connection to a SCALANCE W700/W1700 M12 with N-Connect or for connecting
the lightning protection element LP798-1N/LP798-2N , the flexible connecting cable
N-Connect/N-Connect Male/Male can be supplied as an accessory.
Length in m
1
2
5
10
Control cabinet bushings with suitable cables are available for IWLAN devices
located in a control cabinet. You will find detailed information in the catalog IK PI.
3

Installation

3.1

Direct wall mounting

Drilling template
The graphic below shows distances between the drill holes. Use this information for
drilling. The dimensions are specified in mm.
Procedure
Note
Remember that the distance between the antenna and the wall must be at least 4.2
mm.
Antenna ANT793-6DG
A5E03484067-05, 05/2019
Article number
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
Installation
31