Medion LIFE P14325 Kurzanleitung Seite 95

NETWORK Here you select the network type:
TYPE
After making a selection with the direction buttons  and confirming
with the OK button, an overview of all available networks appears. Make
a selection and confirm with the OK button. If a password is required for a
network, a virtual keyboard appears which you can use to enter this with the
help of the direction buttons  and the OK button. After entering the
password, select
PRESS WPS This option enables you to quickly establish a WPS connection via a wireless
ON YOUR WI-
network (Wi-Fi). Hold down the WPS button on your router and confirm this
FI ROUTER
option OK using the OK button. Then the WPS connection will be made.
(only for WLAN)
INTERNET Press the OK button in order to test the Internet speed.
SPEED TEST
ADVANCED Press the OK button to call up further network configuration options.
SETTINGS
CONFIGURATION
CONFIGURATION
WAKE ON Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode. If the TV is
turned off and on again at the mains switch, the connection between the two
devices will be automatically restored.
 Exit the network settings by pressing OK.
 After exiting the network settings, the channel search will start for your previously selected
preferred reception type. Also pay attention to any other information that is displayed on the
screen depending on your selection.
12
Network settings
on the keyboard and confirm with the OK button.
OK
Choose the setting
you select
in which you can manually enter the data for the
ADRESS, SUBNET MASK
using the direction buttons  and the number
buttons.
Select here between
DNS
appear in which you can manually enter the data for
the
DNS SERVER 1
direction buttons  and the number buttons.
An existing network connection can be terminated by pressing
the red button.
setting to activate this function. The device being used as a remote
ON
WIRELESS DEVICE
AUTOMATIC IP
, three additional lines appear
MANUAL IP
and
AUTOMATIC DNS
. If you select
MANUAL DNS
and
DNS SERVER 2
or .
WIRED DEVICE
or . If
MANUAL IP
IP
DEFAULT GATEWAY
or
MANUAL
, two additional lines
using the